Ideal for cargo bikes, trike or similar, our BPM cargo kit is the perfect solution for riders and deliverymen who have to carry weight. 500 watts of nominal power and 800 of maximum, along with a 22 amp controller and 9 oversized mosfets make our cargo kit a true off-roader.
Ideal for cargo bikes, trike or similar, our BPM cargo kit is the perfect solution for riders and deliverymen who have to carry weight. 500 watts of nominal power and 800 of maximum, along with a 22 amp controller and 9 oversized mosfets make our cargo kit a true off-roader.
Its maximum speed is limited to 25 km / h. allowing greater torque, with torque reaching 48 n / m
![]() |
Available in two sizes, 20 "and 26" in both front and rear versions
|
DATA SHEET | |
|
|
At CicloTEK we like to adapt to you, that's why, we have a wide range of batteries so you can find the one that best fits your bicycle and with different capacities, so that you find the most suitable for the use you are going to make of your new vehicle electric:
FT BATTERIES |
|
![]() |
FT batteries are intended to be housed in the bottle cage hole. Its aesthetic result is excellent, ideal on mountain bikes or in combination with integrated controllers (HIC). We have FT batteries in the following capacities for the platinium kit:
|
CK BATTERIES |
|
![]() |
Model CK batteries are installed in a special carrier that is included with the kit. It is necessary that the bicycle has the necessary screws to install a carrier. The controller is housed in a box for this purpose (included). The battery features a battery powered tail light. Available in two versions
|
BS BATTERIES |
|
![]() |
BS batteries are housed in a tool bag, which is secured with straps behind the saddle. It is a battery especially suitable for double suspension bicycles, in which it is not possible, due to its geometry and configuration, to fit other types of batteries. The available versions are:
|
VINTAGE BATTERIES |
|
![]() |
|
![]() |
|
DATA SHEET | |
|
|
In the BPM cargo kit you can choose between five display models, from the analog display, with three levels of assistance and the most basic functions of speed and battery level, to the most advanced color display, going through the traditional LCD5 display. or the mini screen, with the accelerator integrated in it.
The PAS sensor is the element that detects pedaling and makes the kit work. With the different pedaling sensors we adapt to the bottom bracket that your bicycle has. We have pedaling sensors for spindle shafts and for hollotech, hollow shafts, presffit or similar. Due to the number of versions of existing bottom brackets it is possible that some adaptation will have to be made in the PAS.
Brake cut-off systems cut motor current while braking. They are an additional security element to the kit. Highly recommended in cases of technical use of the bicycle or in urban use that allows us to stop the engine immediately. In addition, they protect the motor in the event that it is acting and being braked at the same time.