The CicloTEK Direct Drive KIT is a kit specially designed for those applications that require moving large weights. Ideal for bicycles or cargo tricycles, since it is a direct gearless motor. Maximum speed: 20 km / h.
The CicloTEK Direct Drive KIT is a kit specially designed for those applications that require moving large weights. Ideal for bicycles or cargo tricycles, since it is a direct gearless motor, which offers greater drag resistance for heavy weights. Its nominal power is 750 watts. With the 22 amp electronics it will allow you to select between 5 levels of assistance and a maximum power of 800 watts. Maximum speed: 20 km / h.
![]() |
Available in two sizes, 20 "and 26", See radiating options in the dropdown.
|
DATA SHEET | |
|
|
The controller is the brain of the system. It receives the instructions on the screen and tells the kit how to operate. Direct Drive motors mount a 20 or 22 amp controller depending on version.
The 20-amp controller has a "reverse" function, that is, it allows the motor to go in reverse, for which it has an outlet to install the button that allows reverse gear (included in the kit)
The 22-amp driver is an oversized, 9-reinforced mofset driver, especially for bikes or cargo tricycles.
Next to the controller you can choose a bag or box to house it. All our controllers have waterproof connections and light output. It is an output at 36, volts and 0.5 amps, valid only to work in conjunction with the Cyclotek light pack. (no support or guarantee will be given on the operation of the light output with other brands)
Clicking on the image you will see each controller (opens in a new tab)
At CicloTEK we like to adapt to you, that's why, we have a wide range of batteries so you can find the one that best fits your bicycle and with different capacities, so that you find the most suitable for the use you are going to make of your new vehicle electric:
FT BATTERIES |
|
![]() |
FT batteries are intended to be housed in the bottle cage hole. Its aesthetic result is excellent. We have FT batteries in the following capacities for the Direct Drive kit
|
CK BATTERIES |
|
![]() |
Model CK batteries are installed in a special carrier that is included with the kit. It is necessary that the bicycle has the necessary screws to install a carrier. The controller is housed in a box for this purpose (included). The battery features a battery powered tail light. Available in two versions
|
BATTERIES BS |
|
![]() |
BS batteries are housed in a tool bag, which is secured with straps behind the saddle. It is a battery especially suitable for double suspension bicycles, in which it is not possible, due to its geometry and configuration, to fit other types of batteries. The available versions are:
|
VINTAGE BATTERIES |
|
![]() |
|
The PAS sensor is the element that detects pedaling and makes the kit work. With the different pedaling sensors we adapt to the bottom bracket that your bicycle has. We have pedaling sensors for spindle shafts and for hollotech, hollow shafts, presffit or similar. Due to the number of versions of existing bottom brackets it is possible that some adaptation will have to be made in the PAS.
Brake cut-off systems cut motor current while braking. They are an additional security element to the kit. Highly recommended in cases of technical use of the bicycle or in urban use that allows us to stop the engine immediately. In addition, they protect the motor in the event that it is acting and being braked at the same time.
Electric kit for bromptom bike