Platinium e-bike Motor 250 watt. 16X1-3/8'' Bromptom

Controller for kits with LED3, LCD5 or LCD5 PLUS display   

• Rated / maximum amperes: 6/13
• Phase: 120º
• Voltage: 36 v.
• Measure: 8X5X3cm
• Weight: 200 gr.
• Waterproof connections.

Connections:

• Handlebar bus cable
• Pas Sensor
• Battery
• Motor
• Lights (1 amp)

Brake levers with signal cut-off.

Waterproof connection. Cable lenght 20 cm.

2 wires. (Open/Close). Normally open.

Safety element. They cut the motor power as soon as the brakes are pressed, reducing the brake time / distance.

Recomended for 250 watt. motor.

Mandatory for 500+ watt. motor.

Prevents the handlebar from turning when the bicycle is parked, with universal tube adapter (up to 61.3 mm), in a plastic bag

Controller for kits with LED3, LCD5 or LCD5 PLUS display   

• Rated / maximum amperes: 6/13
• Phase: 120º
• Voltage: 36 v.
• Measure: 8X5X3cm
• Weight: 200 gr.
• Waterproof connections.

Connections:

• Handlebar bus cable
• Pas Sensor
• Battery
• Motor
• Lights (1 amp)

• Charger suitable for 36 V Lithium Ion batteries.
• Jack type connection (verify that the connection matches wiht the charger to be replaced).
• Valid for our  36 V LF, CK (11 & 16 Ah.) and FT batterys.
• Rated voltage / maximum output 36/42

For car lighter socket, 12V.

• Charger suitable for 48 V Lithium Ion batteries.
• RCA type connection (verify that the connection matches wiht the charger to be replaced).
• Valid for our  48 V FT batterys.
• Rated voltage / maximum output 48/52