Kit Platinium ejemplo

The BPM LCD5 KIT will allow you to enjoy a new concept of electric bicycle. Its high power (800 watts maximum) and its speed of 33 km / h. They will allow you to transform your conventional bike into a high-end bike and excellent performance, with superb performance even on steep climbs. It has a panel with 5 levels of assistance.

Kit BPM LCD5

329,00 €tax incl.

- +

-:
Motor position:
Motor:
Battery type (possiton):
Battery type (possiton)   
Battery type (capacity):
Alojamiento controlador:
  • +20,00 €
Controllers:
Controllers   
cableado motores:
Cable alargador:
Cable alargador   
Alojamiento controlador:
Alojamiento controlador   
Display type:
  • /img/co/57.jpg
    LCD5 Display (2201058)
  • /img/co/216.jpg
    LCD5 XS Display (2201082)
  • /img/co/58.jpg
    LCD5 plus Display (2201095) +30,00 €
  • /img/co/178.jpg
    LCDX Color display (2201083) +50,00 €
PAS type:
PAS type   
Cable pas:
  • /img/co/176.jpg
    PAS cable extender 80 cm.(2201153)
Brake system (optional):
Brake system (optional)   
Throttle (optional):
Throttle (optional)   
7:
-
Product
Weight:: Kg
 
More info

The BPM LCD5 KIT will allow you to enjoy a new concept of electric bicycle. Its high power (800 watts maximum) and its speed of 33 km / h. They will allow you to transform your conventional bike into a high-end bike and excellent performance, with superb performance even on steep climbs. It has a panel with 5 levels of assistance.

 
Motor
With its 500 watts. Nominal, our famous BPM engine, also known as "El Escaldor", has extraordinary power capable of climbing hills quickly and forcefully. In combination with the LCD5 controller it supplies up to 792 watts of maximum power.




Available in the following  sizes  (select from the drop-down menu)
  • Front 20 "and 26"  (Due to the high horsepower of this engine it is highly recommended to strengthen the front forks) *
  • Rear 135 mm. Thread (20): Rear configuration, for thread sprockets.
  • Rear 135 mm. CST (26,27.5, 28 ”): Rear configuration, for cassette sprockets.
It reaches a speed of 33 km / h: The CicloTEK BPM motor does not offer resistance to pedaling when it is not active. This way, you can ride your bike without starting the engine if you want. When connected, its operation is extremely smooth and quiet.

Reinforced rim and spokes. It is compatible with disc brakes.
    * Ciclotek is not responsible for damage caused to bicycles or users by the assembly of this kit.


    DATA SHEET
    • Technology: Brushless geared.
    • Nominal voltage: 36v.            
    • Torque: 52 nm
    • Rpm: According to radio ( see table )
    • Nominal power: 500 watt.
    • Waterproof connector for easy replacement
    • Weight: 5 Kg.
    • Dimensions
     
    Controller

    The controller is the brain of the system. It receives the instructions on the screen and tells the kit how to operate. BPM motors mount a 22 amp controller. and can have a version integrated in the battery holder (only in combination with the FT model batteries). 

    Its programming is specially optimized so that pedaling assistance is natural, but at the same time effective. The exits are smooth and progressive, but the forceful acceleration. Next to the controller you can choose a bag or box to house it (in case it is an external controller). All our controllers have waterproof connections and light output. It is an output at 36, volts and 0.5 amps, valid only to work in conjunction with the Cyclotek light pack. (no support or guarantee will be given on the operation of the light output with other brands)

    Clicking on the image you will see each controller (opens in a new tab)

     

     
    Battery

    At CicloTEK we like to adapt to you, that's why, we have a wide range of batteries so you can find the one that best fits your bicycle and with different capacities, so that you find the most suitable for the use you are going to make of your new vehicle electric:

    FT BATTERIES

    FT batteries are intended to be housed in the bottle cage hole. Its aesthetic result is excellent, ideal on mountain bikes or in combination with integrated controllers (HIC). We have FT batteries in the following capacities for the BPM kit:

    • 11 Ah FT battery.

    • 16 Ah FT battery.

    • 17.5 Ah FT battery. 

    • 19.2 Ah FT battery. 

    CK BATTERIES

    Model CK batteries are installed in a special carrier that is included with the kit. It is necessary that the bicycle has the necessary screws to install a carrier. The controller is housed in a box for this purpose (included). The battery features a battery powered tail light. Available in two versions

    • 11 Ah CK battery.
    • 16 Ah CK battery.

    BATTERIES BS

    BS batteries are housed in a tool bag, which is secured with straps behind the saddle. It is a battery especially suitable for double suspension bicycles, in which it is not possible, due to its geometry and configuration, to fit other types of batteries. The available versions are:

    • 10.4 Ah BS battery.
    • 12.8 Ah BS battery. 

    VINTAGE BATTERIES

    • If you are a lover of the classic, vintage batteries will surely fit your style. From 12.8 Ah. capacity are served in a genuine leather bag. Available in two versions:
    • 12.8 Vintage Drum and Black Leather Bag
    • 12.8 Vintage Drum and Brown Leather Bag

     
    Display

    In the platinium plus kit you can choose between four screen models, from the simplest to the most advanced color screen, through the traditional LCD5 screen.

     
    PAS

    The PAS sensor is the element that detects pedaling and makes the kit work. With the different pedaling sensors we adapt to the bottom bracket that your bicycle has. We have pedaling sensors for spindle shafts and for hollotech, hollow shafts, presffit or similar. Due to the number of versions of existing bottom brackets it is possible that some adaptation will have to be made in the PAS.

     
    Throttle

    Allows you to use the motor without pedaling. Its optional installation and use is not allowed on public roads. We have several models of throttle to suit the handlebar and customer's claims:

       
      e-Brakes

      Brake cut-off systems cut motor current while braking. They are an additional security element to the kit. Highly recommended in cases of technical use of the bicycle or in urban use that allows us to stop the engine immediately. In addition, they protect the motor in the event that it is acting and being braked at the same time. 

      Customers who bought this product also bought:

      9 other products in the same category:

      No products

      To be determined Shipping
      0,00 € Tax
      0,00 € Total

      Prices are tax included

      Check out