Brake sensor with signal cut-off.
Recomentded for Hydraulic brake and gearshift/brake combos.
Waterproof connection. Cable lenght 20 cm. aprox.
2 wires. (Open/Close). Normally open.
Safety element. They cut the motor power as soon as the brakes are pressed, reducing the brake time / distance.
Recomended for 250 watt. motor.
Mandatory for 500+ watt. motor.
RACE motor, specially designed for road-bike.
42 km / h top speed (with 36v voltage) Ideal for those users who need speed but without excessively increasing power.
Black color engine, 28 "rim spoke. Black double wall rim and reinforced silver colored spokes.
350 watts of nominal power, 612 maximum.
Output for cassette sprockets.
Full pedaling sensor PAS, composed of sensor + 12 magnets disc. Valid for traditional square axle. "Easy Split" system, you do not need to remove the connecting rod or tools for its placement. Connection to the controller: Waterproof
36V front motor mounted on a special 26 "rim. With the possibility of reversing, making it ideal for special vehicles such as reduced mobility saddles, tricycles or the like. Direct, gearless motor, very efficient and powerful. It offers resistance when disconnected
Bus connection cable 1 to 4.
To connect the HIC or Waterproof controllers to the handlebar elements
Output for display, throttle and brake levers (X2)
Cable length: 95 cm.
* NOT compatible with CTX (central) * ONLY suitable for hub motors *
For LCD5, LCD5 plus and compatible displays only.
PAS Sensor for ebike applications.
10 magnet + HAL sensor.
Disk diameter 85 mm.
Valid for square crank only.
Waterproof connector. Cable length 80 cm.
3 wire connection (+5v, GND, Signal)
PAS Sensor for ebike applications.
10 magnet + HAL sensor.
Disk diameter 85 mm.
Valid for square crank only.
Waterproof connector. Cable length 20 cm.
3 wire connection (+5v, GND, Signal)
Extension cable for bus cable 1 to 4.
For those installations that require a longer calbe (tandems, tricycles, extra large bicycles ...)
* NOT compatible with CTX (central) * ONLY suitable for hub motors *
With its 500 watts. Nominal, the CicloTEK FAT 500 engine offers the perfect balance between weight and performance. In combination with the 22 amp LCD5-HIC controller it supplies up to 800 watts of peak power.
It does not offer resistance to pedaling when it is not active. This way, you can use your bike without starting the engine. Its operation is extremely smooth and quiet.